DC 5V Small Reduction Stepper Motor

DC 5V Little Reduction Stepper Motor 

Product  Description:

This is a great 1st stepper motor, great for modest initiatives and experimenting with steppers.

This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32

phase (11.25 degree) per revolution, and inside is a one/sixteen reduction equipment set. (Really its one/16.032

but for most reasons one/sixteen is a very good adequate approximation) What this signifies is that there are

truly 32*sixteen.032 actions for each revolution = 513 steps! The shaft is flattened so its effortless to connect stuff

to it with a set-screw. A best initial stepper motor and performs nicely with the Motor Shield for Arduino.

The gearing has a number of aspect outcomes which are important to observe. Initial, you can flip the stepper by

hand but not as easily as an un-geared stepper. It also indicates you shouldn’t use interleaved or

micro-stepping to control or it will take eternally to flip. Instead use solitary or double stepping. The

torque is reasonably large but its slower than un-geared steppers – we maxed out at about 50 RPM by

above-driving it a little bit with 9VDC. At 5V attempt to stick to beneath twenty five RPM

To use with the Adafruit Motor Defend, connect pink to ground (center), orange and pink to one motor

port (say M1) and blue and yellow to the other motor port (say M2). So in order, thats: orange – pink –

purple – blue – yellow. Then just use the instance code that will come with the Adafruit Motor Defend library

and set the constructor to Adafruit_StepperMotor *myMotor = AFMS.getStepper(513,motornum) and

the pace at 5 RPM by calling motor->setSpeed(five). Otherwise, you can also wire it up with some transistors

and use the Arduino Stepper library

CZPT Detalis:

Unipolar stepper with .1″ spaced five-pin cable connector

513 measures for every revolution

1/sixteen.032 geared down reduction

5V DC recommended operation

Bodyweight: 37g.

Dimensions: 28mm diameter, 20mm tall not like 9mm shaft with 5mm diameter

nine” / 23 cm long cable

Keeping Torque: a hundred and fifty gram-pressure*cm, 15 N*mm/ two oz-power*in

Shaft: 5mm diameter flattened

Approx 42 ohm DC impedence for each winding

Packing &Shipping and delivery:

CZPTize branded packaging can be supplied,safe packing or any other requested package deal.

Delivery: We will do the getting older testing just before send out out the items. Use high top quality bundle to make sure it can supply properly.

Firm Introduction:

HangCZPT Xuan Yao Electronic CO., Ltd is a company engaged in all Raspberry Pi connected items for much more than eight years, Our purpose was create the best location for understanding electronics and source the very best developed goods for consumers.For all these a long time, we got ample experience for these. We have currently open up some mould according to the specific request of Raspberry Pi customers. We have produced a whole lot of our own goods. For illustration: Raspberry Pi Zero Digital camera, FishEye Digicam, Raspberry Pi seven inch Screen, Raspberry Pi Case, Zero Kits, Zero Pin CZPTer…..

FAQ:
Q1. Do you provide samples? is it free or additional?
A1: Of course.we could supply samples with free of charge charge,However, consumer need to liable for shipping freight.

Q2: How to continue an buy?
A2: To start with, permit us know your requirements or software. Next, we quotation according to your demands or our recommendations.Thirdly, consumer confirms the samples and pay out deposit for the official purchase. Lastly, we prepare the creation and ship when it is prepared.

Q3: Do you supply OEM services?
A3: Indeed, Sure! Wealthy expertise on printing brand on item and OEM bundle.

This autumn: How numerous days I can get the products right after payment?
A4: Typically, goods will be transported within 3 times. By DHL will consider about three~5 days. So total will get about 4~eight times to arrive at your arms.

Q5: Could I get your Photos about the solution CZPT the watermark to my internet site?
A5: Of training course, we could do this for you.

Q6: What is your terms of payment ?
A6: For small quantity orders, one hundred% much better compensated by PayPal or T/T in progress. For large quantity orders like much more than ten thousand USD, thirty% T/T in progress , harmony totally paid before shipment.

Q7: How do you guarantee my products right?
A7: Purchase will be arranged exactly as asked for, Also we will get you images if needed prior to offering out.

Our Services:
1. CZPT preparations and packaging are CZPT.
two. Free samples can be offered for testing.
3. 1 Yr guarantee.
4. We have our own factory in ZheJiang HangCZPT,we can boost you excellent high quality and aggressive price.
5. We insist on that your pleasure is initial, we are trying to keep on substantial Performance and Immediate Reaction.

 

DC 5V Small Reduction Stepper Motor