High Voltage Electromagnetic DC Motor

Solution Description:
 
DC motor is a rotating motor that can transform DC electric energy into mechanical strength (DC motor) or mechanical power into DC electric power (DC generator). It is a motor that can convert DC and mechanical vitality into one another. When it operates as a motor, it is a direct present motor, which converts electrical vitality into mechanical vitality when it runs as a generator, it is a direct existing generator, which converts mechanical vitality into electrical strength.
 

Item Title Large voltage Electromagnetic DC Motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition composition The structure of DC motor need to consist of two components: stator and rotor. The static portion of DC motor is referred to as stator. The principal operate of stator is to generate magnetic field, which is composed of foundation, major magnetic pole, commutation pole, end cap, bearing and brush unit. Managing part is called rotor, whose primary operate is to generate electromagnetic torque and inductive electromotive force. It is the hub of energy conversion of DC motor. So it is also frequently referred to as armature, which consists of rotor, armature main, armature winding, commutator and supporter.
Design Z Variety
Seat number Z315-Z1000
power 60~2800kW
Voltage 220~1000V
Torque selection 1.five ~180kNm
Safety amount IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Functioning pace  Constant Pace /Minimal Pace /Alter Speed /Higher Speed Other 
Major classification DC Motor is a machine that converts mechanical energy into DC energy. It is mostly employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy source of alternator. Although in areas in which DC power is required, AC power rectifier is also utilised to convert AC into DC electricity, but from some facets of efficiency, AC rectifier electricity source can not completely change DC generator.  
Software DC motors are commonly used in tape recorders, video recorders, movie discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Maintenance strategy Expert motor routine maintenance middle motor routine maintenance process: cleaning stator and rotor – replacing carbon brush or other elements – vacuum F force dipping paint – drying – Calibration equilibrium.
one. Use environment ought to be always dry, motor area ought to be retained thoroughly clean, air consumption must not be hindered by dust, fibers and other obstructions.
2. When the thermal safety of the motor proceeds to operate, it need to be ascertained whether or not the fault arrives from the motor or the overload or the setting value of the protective device is as well minimal. Right after removing the fault, it can be place into procedure.
three, guarantee that the motor is properly lubricated throughout procedure. The standard motor runs for about 5000 hours, that is to say, lubricating grease need to be included or replaced. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic stress must change lubricating grease in time. When replacing grease, the outdated grease must be removed, and the oil groove of bearing and bearing include need to be washed with gasoline. Then ZL-3 lithium grease ought to be crammed with one/2 (2 poles) and two/three (four poles, 6 poles and eight poles) of the cavity in between the inner and outer rings of the bearing.
four. When the life of the bearing is more than, the vibration and sounds of the motor will boost naturally. When the radial clearance of the bearing reaches the following value, the bearing should be changed.
five, when taking away the motor, it is Alright to eliminate the rotor from the shaft extension or the non extension conclude. If it is not essential to unload the enthusiast, it is far more convenient to consider out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from getting destroyed.
six. When replacing the windings, the sort, dimensions, turns and gauges of the authentic windings need to be recorded. When these data are dropped, they need to be attained from the producer and the authentic created windings must be transformed at will, which frequently deteriorates a single or many efficiency of the motor or even can make it unattainable to use them.

 

 

High Voltage Electromagnetic DC Motor