Permanent Magnet Synchronous DC Motor for Water-Jet Loom

Item Description:
 
DC motor is a rotating motor that can convert DC electric powered power into mechanical energy (DC motor) or mechanical power into DC electric vitality (DC generator). It is a motor that can change DC and mechanical strength into 1 yet another. When it runs as a motor, it is a immediate present motor, which converts electrical energy into mechanical energy when it runs as a generator, it is a direct present generator, which converts mechanical energy into electrical vitality.
 

Item Title Permanent Magnet Synchronous DC Motor for H2o-jet Loom
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The composition of DC motor ought to consist of two components: stator and rotor. The static element of DC motor is referred to as stator. The principal operate of stator is to produce magnetic discipline, which is composed of foundation, primary magnetic pole, commutation pole, stop cap, bearing and brush device. Operating component is referred to as rotor, whose major operate is to generate electromagnetic torque and inductive electromotive force. It is the hub of power conversion of DC motor. So it is also frequently named armature, which consists of rotor, armature core, armature winding, commutator and supporter.
Model Z Sort
Seat variety Z315-Z1000
electrical power 60~2800kW
Voltage 220~1000V
Torque selection 1.five ~180kNm
Protection degree IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Running speed  Constant Pace /Low Speed /Alter Pace /Higher Speed Other 
Primary classification DC Motor is a machine that converts mechanical energy into DC power. It is mostly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power provide of alternator. Even though in places the place DC energy is needed, AC power rectifier is also employed to change AC into DC electrical power, but from some aspects of efficiency, AC rectifier power supply can not fully change DC generator.  
Software DC motors are broadly utilised in tape recorders, movie recorders, video clip discs, electric powered shavers, hair dryers, electronic watches, toys and so on.
Upkeep approach Professional motor upkeep center motor maintenance process: cleaning stator and rotor – changing carbon brush or other components – vacuum F stress dipping paint – drying – Calibration balance.
1. Use setting must be usually dry, motor surface must be stored clear, air ingestion ought to not be hindered by dust, fibers and other road blocks.
2. When the thermal defense of the motor carries on to work, it must be ascertained whether the fault will come from the motor or the overload or the placing price of the protecting unit is as well low. Right after removing the fault, it can be set into procedure.
three, guarantee that the motor is well lubricated in the course of procedure. The common motor operates for about 5000 hrs, that is to say, lubricating grease ought to be additional or changed. When bearing overheating or lubricating deterioration is discovered in procedure, the hydraulic stress need to modify lubricating grease in time. When replacing grease, the aged grease need to be taken off, and the oil groove of bearing and bearing cover need to be washed with gasoline. Then ZL-three lithium grease need to be filled with one/two (2 poles) and 2/three (four poles, six poles and eight poles) of the cavity amongst the inner and outer rings of the bearing.
4. When the existence of the bearing is in excess of, the vibration and noise of the motor will improve obviously. When the radial clearance of the bearing reaches the following price, the bearing must be changed.
five, when eliminating the motor, it is Alright to get rid of the rotor from the shaft extension or the non extension conclude. If it is not necessary to unload the admirer, it is much more practical to take out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from currently being ruined.
six. When changing the windings, the sort, size, turns and gauges of the first windings need to be recorded. When these knowledge are lost, they need to be acquired from the producer and the first designed windings should be changed at will, which usually deteriorates one particular or a number of efficiency of the motor or even tends to make it unattainable to use them.

 

 

Permanent Magnet Synchronous DC Motor for Water-Jet Loom